Accessories and Ground Fuelling Equipment
FAUDI Aviation provides accessories for filter vessels and sensor products. The product portfolio is being expanded by ground refuelling equipment.
Automatic Air Eliminator
Automatic Air Eliminator
The automatic air eliminator valve consists of a fully welded housing and a float ball made of stainless steel.
Pressure Relief Valve
Pressure Relief Valve
The pressure relief valve has been provided for the dissipation of thermal expansion. This valve can be adjusted to open at a desired pressure, to vent the overpressure built up in the system due to thermal expansion in a non-flowable condition. The outgoing line should be led without pressure into a slop tank.
Differential Pressure Gauges
Differential Pressure Gauges
The differential pressure gauge is used to measure the pressure difference between the inlet and outlet of a filter vessel indicating the filter element condition.
Differential Pressure Gauge for VFH
The differential pressure gauge is used to measure the pressure difference between the inlet and outlet of a VFH vessel indicating the filter element condition.
Drain Valves
Drain Valve
Manually operated ball valve to sample or to drain the vessel. The valve may be provided with a flow rate control which prevents excessive flow rates through the filter/water separator.
Sample Probe
Permits samples to be taken up and downstream of the filter. This ensures that only fuel is removed from the middle of the liquid flow.
Accessories for Sensor Products
DRAINGUARD®-Sump
Fully automatic drainage system for water sumps in filter/water separators. The DRAINGUARD® sump contains a SLUGGUARD® sensor for the detection and differentiation of water and fuel.
AFGUARD® loop tester
Hand held device to test the loop installed behind the AFGUARD®. According to JIG Bulletin 110, system shall be tested at least every three month in accordance with the manufacturer’s instructions.
Barrier
The barrier supplies e.g. dP transmitter, if necessary also in hazardous area, and passes on the signal galvanically isolated.
Aviation Fuel Hydrant Pit Lid
Aviation Fuel Hydrant Pit Lid
The Aviation Fuel Hydrant Pit Lid fully complies with EN 124-1 & 3 for class F900.